Sunsui Process Systems

XD Series Humidity And Temperature Sensor are equipped with the tried-and-tested Hygromer® IN-1 sensor and boast unbeatable value for money. The optional Rotronic SW21 software enables you to scale, calibrate and adjust (only humidity) the transmitter.
Device type
Humidity / Temperature probeRange of application measurement probe-40...85 °C / 0...100 % RH-100...200 °C * / 0...100 % RH * Short - term peak loadAccuracy at 23 °C, ± 5 K0.8 %RH / 0.2 K @ 5...24 VDC
Adjusted at 23 °C and 10, 35, 80 % RH @ 5 VDCOutputsAnalog ( voltage / current), digital ( UART / RS - 485 )Power supply5...16 VAC / 5...24 VDC (0...1 V)
12...16 VAC / 16...24 VDC ( all kind of output signals )IP ProtectionIP65Technical InformationCurrent consumption7 mA ( typical ) @ 24 VDC, 0...10 V
12 mA (typical) @ 5 VDC, 0...1 VRange of application electronics
-40...85 °C / 0...100 % RHFunctionsPsychrometric calculationsDew point / Frost pointAdjustment via softwareSingle point, multipoint, dew point ( % RH / °C), with service cableProbFilterPolyethylene, 20 pmNo filter ex worksFilter carrierPolycarbonateBrass, nickel - platedMaximum wind velocity20 m/s,
with polyethylene filter3 m/s, without filterLength of extension cable2 m / 5 mMaintenance / CalibrationAnnual calibration ( recommended )Humidity sensorROTRONIC HYGROMER® IN-1Temperature sensorPt100 1/3 Class BAnalog output0...1/5/10V0...1/5/10V
0/4...20 mADigital outputUART or RS - 485Analog outputAccuracy at 23 °C, < 1 mV (1 V) / < 10 mV (10 V) / < 20 µAResponse time - r63< 15sLong term stability humidity sensor< 1% RH / yearConformities / HousingCE / EMC compatibilityCE conformant 2007/108 / EGFDA / GAMP conformity21 CFR Part 11 / GAMP 5Housing materialPolycarbonatePEEKDimenstions probe headDiameterθ 15 mmLength135 mm100 mm / 250 mm
400 mm / 550 mm / 700 mmSensor Cable-2 m / 5 m